If you want to add additional computers to your network in the future, all you need are more Network Interface Cards and 10BaseT cables. Simply plug the new network cards(s) into your computer an run a cable form the card to one of the hub's open ports.
For even greater expandability, the hub can be joined, or uplinked, to other hubs. If you look closely at the front of the hub, you will see a port marked Uplink. To uplink a hub, simply insert a standard, straight-through 10BaseT cable between the Workgroup Hub's Uplink port and any of another hub's regular 10BaseT ports. A maximum of three hubs can be connected together.
For example, like most hubs, a 5-Port Hub's port number 5 and Uplink port are joined internally. This means that when port 5 is in use, the uplink port cannot be used, and vice-versa. If you plan on using the uplink port, you'll need to disconnect any cables that are connected to port 5.
Setting up your network card's software involves installing a......
Join Now or Login to view the rest of this paper.
Approximate Word Count: 1574
Approximate Pages: 7 (260 words per double-spaced page) |